FAA Blames Legacy TDM Switches for Nationwide Ground Stop, Denies SMART Involvement
·2026.11.14 20:44
Key point
Transportation Secretary Duffy stated that overloaded time-division multiplexing equipment caused the outage, while denying that the newly rolled out SMART system was connected to the failure.
Details
- FAA issued a nationwide ground stop on November 13, canceling or delaying more than 9,000 flights due to unstable radar data and communications at air route traffic control centers.
- Transportation Secretary Sean P. Duffy attributed the failure to overloaded legacy TDM switches and routers, asserting that the newly installed IP switches did not fail and that the SMART system was "completely isolated" from the incident.
- SMART, a cloud-based system integrating about 200 types of data, was expanded to all 22 air traffic control centers on November 10, three days before the outage.
- Preliminary FAA data indicates SMART helped reroute 180 flights between September 21 and November 10, saving an average of 10 minutes and just under 80 gallons of fuel per affected flight.
- Air Space Intelligence (ASI), the developer of SMART, holds an $875 million, 12-year contract with the FAA for SMART and the Flow Management Data and Services (FMDS) platform.
- No independent technical findings have been published to verify the separation between SMART and the legacy communications infrastructure, and the National Air Traffic Controllers Association (NATCA) stated it was not involved in SMART's design, testing, or deployment.